18
CLEANING METALLIC PARTS
For best results, it is important to periodically check and care for the spray arms.
WARNING
To prevent injury during care and maintenance/cleaning, wear
gloves and/or protective clothing.
Some exterior and interior parts can be cleaned
with a damp cloth or sponge. A cloudy film may
form on the surface of the stainless steel tub,
especially with hard water.
CLEANING THE LOWER SPRAY ARM
•
Make sure that the water jet holes are not
blocked by food particles.
•
When cleaning is necessary, remove the lower
spray arm by pulling up.
•
After cleaning the lower spray arm, replace it
by pushing down until it clips into place. Be
sure the spray arm turns freely.
CLEANING THE UPPER SPRAY ARM
1
Pull the upper rack forward. Make sure that
the water jet holes are not blocked by food
particles.
When cleaning is necessary, remove the
upper spray arm by turning the nut on
the bottom of the spray arm 1/8th turn
counterclockwise and pulling down
(see illustrations).
2
After cleaning the upper spray arm, press
it up into place. Turn the nut 1/8 turn
clockwise to make sure the nut locks
back into place.
CA R E & C L E A N I N G
Содержание LDF6920BB
Страница 69: ...69 Français GUIDE DE DÉPANNAGE ...