11
ENGLISH
To turn on a SINGLE
surface unit:
(Left Rear, Right Rear, Left Front)
➊
Press
ON/OFF
for the desired
element position. The display will
flash .
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
➋
Press + once to turn on the
power level
Hi
or – once to
Lo
.
➌
Use the – / + to choose the
desired power setting.
– / + is continuously accessible.
(Adjustable at any time while the
element is ON.)
➍
To turn off the unit after cooking,
press
ON/OFF
once.
NOTE:
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5 from
9.0
through
3.0
. (by
0.2
from
3.0
through
1.0
)
•
Lo
is the lowest power level available.
NOTE:
To scroll through the power levels quickly press and
hold the – or + key pads until the power level
desired is reached.
HOT SURFACE INDICATOR
The display will Flash HS(Hot Surface).
When the surface is too hot to touch
because of the heating element. It will
remain on after the element is turned
off and the surface has cooled to
approximately
150 deg F.
USING THE ELEMENT
S U R FAC E C O N T RO L S C O O K I N G
CAUTION
• DO NOT touch surface elements until it has
cooled down sufficiently.
- The surface elements may still be hot and burns
may occur.
CAUTION
• SURFACE ELEMENT CYCLES
- When cooking on the surface elements it is possible
for the element to cycle on and off during cooking.
This will happen more frequently when a lower
power is selected however it can also occur on
higher settings as well.
CAUTION
• NEVER leave food unattended at high or medium-
high setting.
- Boil overs can cause smoke.
Greasy spillovers may catch on fire.
Содержание LDE3015SB
Страница 47: ...47 MEMO ...
Страница 48: ...48 MEMO ...