- 12 -
- 13 -
4. Balance weight
1) Remove side 4 screws.
2) Lift the balance weight.
7. Detergent Dispenser
1) Close the door.
2) Remove the wire connections.
3) Remove 6 screws with brackets.
8. Fan
1) Open the door
2) Remove the outer cover.
3) Remove 2 fixing screws inside and turn
the Inner Cover counter - clockwise.
5. Front Cover
1) Open the door.
2) Remove 6 screws (stainless).
3) Close the door slowly and remove Front
Cover downwards.
6. Control Panel Assembly
1) Open the door.
2) Remove 4 screws (stainless).
3) Remove wire connections.
Be sure the wiring should not be
changed in reassembling.
4) Remove 3 screws for Latch assembly
5) Remove 5 screws for Controller.
Detergent
Dispenser
Door Liner
Door Bracket
Inner
Cover
Out
Cover
Fan
9. Door Spring (Right & Left)
1) Push the Spring upwards and take it off
from the Frame.
Be careful not to be injured by the
sharp edge of Tub.
2) Take the Hinge Link off from the Hinge.
10. Door Liner
1) Open the door.
2) Remove 4 screws.
Do not use other screws for assembling.
