7. Adding Rinse Aid
Dispenser
To fill the Rinse Aid chamber, rotate the round
cap counter clockwise and remove. Fill the
container to the maximum level with a good
quality Rinse Aid, then replace and lock the
cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.
Depending on the dosage setting and the
number of washes, the chamber may need only
to be topped up once per month. The rinse aid
level can be checked by looking at the indicator
window when the dishwasher door is fully
open.
●
Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid required
The dosage setting is factory set to suit most
installations. If, after washing, you notice
cloudy spots, streaks or water marks on your
glassware, it may be necessary increase the
setting. To do so, remove the cap and rotate the
indicator arrow to a higher setting then replace
the cap . If the glasses are smeared or there is
foam present on the bottom of the glass or the
bottom of the machine. Select a lower setting.
HOW TO USE AND OPERATE
Rinse Aid Information
Rinse Aid is necessary in order to get spot and
streak free dishes as well as improved drying.
Using the correct amount will improve wash
performance. However, using too much can
produce excess foam leading to possible water
leaks.
14
