• If the door is slanted to the right as shown in
figure C, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there do
not remain slant, stickiness or a friction sound.
• If the door is slanted to the left as shown in
figure D, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the right leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there do
not remain slant, stickiness or a friction sound.
Fig. C
Fig. D
Case 1. In case the door is slanted to the
right
Case 2. In case the door is slanted to the left
Water tap
Water supply
hose
Valve
INSTALLATION INSTRUCTION
Step 6 :
WATER SUPPLY CONNECTION
Connect the water supply hose to the valve
behind dishwasher and the water tap as shown
in figure.
This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.
When connecting, the sealing tape or sealing
compound should be used to avoid water
leaks. Make sure that the line is not kinked or
sharply bent.
1
2
8
Securely hand tighten supply hose to water
supply.
Plug power supply cord into an earthed the
power plug and switch on.
After installing the product, operate the
dishwasher through one cycle (Quick cycle
is recommended) without loading the
dishes. Through this, you can check for
water leak and operating conditions. When
you operate the product the first, the noise
may be occurred. In that case, turn off
power switch and restart the dishwasher.
1
2
Step 7 :
FINAL CHECK AND
ASSEMBLING
After installing the product, if you feel some
sticky or hear a frictional sound between the side
portion of door and tub when you open or close
the door, you have to adjust the level of product.
Step 8 :
HOW TO LEVEL THE PRODUCT
