LG LCD17VLED, Руководство пользователя

Страница: 7 / 17

5
5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides.
Note :
●
Installation method is different because of Hanging arm hardware's .
●
2.3 Signal Cable Connection
Insert the signal cable into VGA and DVI port of a computer. Then, lockup the cover with screws to assure full
connection to the earth. Insert another end of signal cable into the corresponding port (VGA or DVI port) and
lock up with screws.
2.4 Audio cable connection
Plug one side of the audio cable into the PC audio port, then plug the other side into the audio port of the
monitor.
2.5 Power Cord Connection
Plug one side of the power cord into the AC adapter and the other side into AC power source outlet, then plug
the output side of the AC adapter into the power port at the side of monitor.
2.6 Power on
Switch on the power to both the monitor and your computer. After the monitor is power on, the LED lights up
green or blue. If the LED becomes red and flashing, please check the video signal cable connection. If the
LED is off, please press power switch slightly.
2.7 Self test pattern
If there is no horizontal or vertical sync signal, your monitor will display Fig.4 to Indicate no signal input. After
structure
Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or
vehicles.
书