11
RDS
AF(Alternative frequency)
When the reception quality drops, the tuner automatically changes to another station in the
network, broadcasting a better reception quality, using the PI and AF codes.
ON : wherever you drive, you can continue to listen to the same program without
interruptions.
OFF : Only station name will be displayed. In case of poor reception no alternative station
can be used.
REG (Region)
ON : The unit switches to another station, within the same network, broadcasting the same
programme when the receiving signals from the current station become weak.
OFF : The unit switches to another station, within the same network when the receiving sig-
nals from the current station become weak.(In this mode, the programme may differ from
the one currently received.)
TA (Traffic Announcement Identification)
Seek : When the newly tuned station does not receive TP information for 5 seconds, the
receiver retunes to the next station which has the same PI as the last station, but has the
TP information.
Alarm : When a newly tuned station has no TP information for 5 seconds, a double beep
sound is output.
TA VOLUME
Control the volume of TA (Traffic Announcement Identification)
DPI (Programme Identification)
Sound : If the sound of a station with different PI is heard intermittently, the receiver mutes
the sound after 1 second.
Mute : If the situation described above is repeated, the receiver instantly mutes the sound.
Display
You can select various display modes. It displays the change of sound output during play.
Animation
ALL
y
Pinball
y
Dance
y
Space
y
Racing
y
OFF
Image
ON : Animation or Graphic EQ are displayed on screen.
OFF : Animation or Graphic EQ are not displayed on screen.
Graphic EQ
OFF
y
Graphic EQ 1
y
Graphic EQ 2
Setup
Sets the beep sound every time a button is pressed.
BEEP 2nd
The beep is generated when a key is long pressed. (1 sec)
BEEP ALL
The beep is generated when any key is pressed.
DEMO ON / OFF
You can change the initial indication on the display to information name. (function name,
EQ name, etc...)
DEMO ON
When the unit is “Power on”, press and hold MUTE/PWR (POWER/
on the remote
control), Demo is displayed on screen.
