CAR CD/MP3/WMA Receiver
9
Listening to the radio - more you can do
Auto search memory
Press
U
U
/AS
. The six strongest broadcast frequencies will be stored under preset
button 1-6 in the order of their signal strength.To cancel, press
U
U
/AS
.
Storing and recalling broadcast frequencies
1 Press
BAND
to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
To scan the preset stations
Press
u
u
/PS
. Each preset station appears. To cancel, press
u
u
/PS
.
To tune in the preset stations
Press
BAND
to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
When a station is stored on the preset numbers on which another station of the
same band has already been preset, the previously preset station is automati-
cally erased.
Moving to another drive
When connecting this unit to multi reader, press
BAND/DRIVE
(
BAND/DRV
on
remote control) to go to the next drive. Each time you press the button, the driv-
er modes changes.
Note
If the USB device is already connected, press
SRC
(
SRC
on remote control.) to
select a source to USB.
Listening to the radio
ON PLAYER
ON REMOTE
1. Select a source to tuner.
2. Select a band.
3. Auto seek.
Manual seek.
SRC
BAND
-
?b / B?
+
Press and hold
-
?b / B?
+
SRC
3
3
/ BAND
?mm
/
MM?
Press and hold
?mm
/
MM?
Connecting USB device
ON PLAYER
ON REMOTE
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
-
-
Rotate PWR
-
-
VOLUME
Connecting an Auxiliary Equipment
ON PLAYER
ON REMOTE
1. Select a source to AUX.
2. Play the connected Auxiliary
Equipment.
3. Adjust the volume.
SRC
-
Rotate PWR
SRC
-
VOLUME
Line out
MP3 Player, etc
Auxiliary input
