background image

A10

Troubleshooting

Display image is incorrect

Display Position is
incorrect.

On the screen
background, vertical bars
or stripes are visible.

Any horizontal noise
appearing in any image or
characters are not clearly
portrayed.

The screen color is mono
or abnormal.

The screen blinks.

Press Adjust of 

Forte Manager Program --> Picture

--> Tracking-->Auto Setup 

to adjust screen

automatically to the optimal condition, which fits to the
current mode. 

Configure by directly adjusting Adjust of 

Forte 

Manager Program --> Picture--> Position

if 

adjusted condition is dissatisfactory

Press Adjust of 

Forte Manager Program --> Picture

--> Tracking-->Auto Setup

to adjust screen

automatically to the optimal condition, which fits to the
current mode. 

Remove vertical lines by adjusting Adjust of 

Forte Manager Program  

--> 

Picture 

-->

Tracking 

-->

Clock

, if adjusted condition is 

dissatisfactory.

Press Adjust of 

Forte Manager Program  

-->

Picture 

-->

Resolution 

-->

Preferred

to adjust

screen automatically to the optimal condition, which
fits to the current mode.  

Adjust by selecting Adjust of 

Forte Manager 

Program   

--> 

Picture 

--> 

Tracking 

-->

Phase

if adjusted condition is dissatisfactory.

Check 

Control Panel --> Display --> Settings

and

adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).

Check 

Control Panel --> Display --> Settings

and

adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).

Check if the signal cable is properly connected and
use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
slot.
Set the color setting higher than 24 bits (true color) at

Control Panel - Settings

.

Check if the screen is set to interlace mode and if yes,
change it to the recommend resolution.

Make sure the power voltage is high enough, It has to
be higher than 

AC100-240V 50/60Hz.

Содержание L1900E




























Отзывы: