2
Connecting
Connecting
15
C
onnecting
2
Speaker Connection
Attaching the speakers to the
player
Connect the wires hooked up to the speaker to the
unit.
-
To connect the cable to the unit, press each
plastic finger pad to open the connection
terminals on the unit. Insert the wire and
release the finger pad.
-
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end
to the terminals (plus).
Colour
Speaker Position
Orange
Sub
woofer
Any front position
Red
Front
Front right
White
Front
Front left
y
Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
y
Place the centre speaker at a safe distance
from the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/ or
property damage.
y
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
,
>
Caution
Attaching the rear speakers to
the wireless receiver
Connect the rear speakers to the wireless receiver
with the speaker cables.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
(+)
(-)
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker
cable. This ferrite core can reduce noises.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Wind the speaker cables once on the ferrite
core.
3. Close the ferrite core until it clicks.
Refer to the fig.3 and comment.
The length
here is as
short as
possible.
Rear of wireless
receiver
