4
Setting up
Attaching the speakers to the DVD receiver
a
a
You will have received four speaker cables.
Each one is colour-coded by a band near each end and connects one of
the four speakers to the DVD receiver.
b
b
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals (plus).
c
c
Connect the wires to the speakers.
Connect the other end of each wire to the
correct speaker according to the colour
coding
:
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
• Be careful to make sure children do not put their hands or any objects into
the *speaker duct.
*Speaker duct: A holl for plentiful bass sound on speaker cabinet(enclosure).
• Use the rear speaker at least 30 CM away from either TV screen or PC
monitor
1 Attach the speakers to the speaker stands by rotating the screw.
2 If you want to arrange the speaker cable, draw the speaker cable
through the hole on the speaker. (front speaker only)
3 Connect the speaker cable. (front speaker only)
The speakers are detached from the speaker stands.
Assembling the Speakers
a
a
b
b
c
c
FRONT R
CENTER
SUB WOOFER
FRONT L
Red
Green
Orange
White
In front of you, to the right of the
screen.
Above screen, directly in front of you.
This can be placed in any front position.
In front of you, to the left of the
screen.
POSITION
SPEAKER
Main Unit
HT904WA-AMP_DKENHL_ENG_0783 3/20/09 6:24 PM Page 4