34
Operation
Oper
ation
4
Radio Operations
Be sure that both FM and AM aerials are
connected. (Refer to the page 22.)
Listening to the radio
1.
Press
t
RADIO&INPUT
until FM or AM
appears in the display window.
The last received station is tuned in.
2.
Press and hold
TUNING
(-/+) for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press
TUNING
(-/+) repeatedly.
3.
Adjust the volume by rotating
VOLUME
on
the front panel or by pressing
VOL
(+/- )on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume.
1.
Press
t
RADIO&INPUT
until FM or AM
appears in the display window.
2.
Select the desired frequency by using
TUNING
(-/+).
3.
Press
ENTER
a preset number will flash
in the display window.
4.
Press
PRESET
(-/+) to select the preset
number you want.
5.
Press
ENTER
.
The station is stored.
6.
Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1.
Press and hold
CLEAR
for two seconds.
"ERASE ALL" will flash up on the unit display.
2.
Press
CLEAR
to erase all saved of the radio
stations.
Deleting a saved station
1.
Press
PRESET
- / +
to Select a preset
number you want to delete.
2.
Press
CLEAR
, the preset number will blink
in the display window.
3.
Press
CLEAR
again, to delete the selectd
preset number.
Improving poor FM reception
Press
B
PLAY, MONO/STEREO
on the remote
control. This will change the tuner from stereo
to mono and usually improve the reception.
HT806TQ-A2_DARELL_ENG_6869.indd 34
2010-11-26 �� 2:50:26
