28
ENGLISH
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1
Put batteries into the Magic Remote and turn the Projector on.
2
Point the Magic Remote at your projector and press the
Wheel (OK) on
the remote control.
•
If the projector fails to register the Magic Remote, try again after turning the
projector off and back on.
To Re-register the Magic Remote Control
1
Press the
and
buttons at the same time, for five seconds, to unpair
the Magic Remote with your projector.
2
Press the
Wheel (OK) button towards the projector to re-register the
magic remote control.
•
Pressing and holding the
button will let you cancel and re-register
Magic Remote at once.