3
Location and Function of Controls
Front Panel
Rear Panel
1. Disc Tray
2. Drive activity indicator (Read/Write)
3. Emergency Eject Hole
4. Stop/Eject Button
4
3
2
1
1 2 3 4 5
1. Digital Audio Output Connector
This connector is not supported.
2. Analog Audio Output Connector
Connect to a sound card. This connection is normally not required.
3. Jumper Connector
This jumper determines whether the drive is configured as a master or slave. Changing the master-slave
configuration takes effect after power-on reset.
4. IDE Interface Connector
Connect to the IDE (Integrated Device Electronics) Interface using a 40-pin flat IDE cable.
NOTE :
Do not connect or disconnect the cable when the power is on, as this could cause a short circuit
and damage the system. Always turn the power OFF when connecting or disconnecting this cable.
5. Power Connector
❋
The drive’s appearance and specifications may change without prior notice.
Содержание GWA-4166B
Страница 1: ...DVD Writable CD RW Drive English ...