LG Information & Communications, Ltd.
FCC ID: FFMGT8110C
Report # EUT User manual.doc
FCC Part 15 Subpart C Test Report
Page 21 of 32
+
+
C
AUTION
Use only nickel-cadium(Ni-Cad)battery in the phone.
5. Replace the battery door.
STEP 5. TURN THE HANDSET ON
You
MUST
install the battery on the handset to turn on and use your phone.
1. Check the power is on and appears on the display
2. You'll hear the handset's ready tones
and the 'READY' message appears on the display.
STEP 6. CHARGE THE HANDSET
Before you use the phone for the first time, you need to charge the battery
for at least 6 hours.
Place the handset in the base of the phone. The charge light the base then comes on.
Whenever you need to charge your handset, you hear short beeps and see the 'LOW BATTERY'
message. Press
TALK
and listen for dial tone to test for a fully charged handset.
1. Press down on the battery cover and slide
the battery cover down to expose the
battery well.
2. Locate the battery connectors inside the
battery well.
If you are replacing a dead battery, remove
the old battery by pulling firmly on the
battery cords.
3. Insert the battery plug into the connector.
It is polarized and only insert in one
direction.
4. Place the battery in the battery well.
READY