LG GR-V2522SL, Руководство пользователя

Страница: 4 / 12

SELECT A GOOD LOCATION NEXT
1. Wipe off all dust accumulated during shipping
1. Place your refrigerator where it is easy to use.
and clean your refrigerator thoroughly.
2. Avoid placing the refrigerator near heat sources,
direct sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.
4. To avoid vibrations, the refrigerator must
be level.
Assemble refrigerator Leg to Hinge Lower pin by
rotating it counter clock wise (Dispenser model).
If necessary, adjust the leveling screw(s) to
compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear.
Leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise the
refrigerator, counterclockwise to lower it.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours.
Check the flow of cold air in the freezer com-
partment to ensure proper cooling has taken
place.
Your refrigerator is now ready for use.
4
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
5. Flammable insulation blowing gases should be disposed appropriately.
Take the cabinet and doors to a recovery plant for flammable insulation
blowing gases.
• Information of fluorinated greenhouse gases
used as refrigerant of this refrigerator.
INSTALLATION
Chemical Name Composition of Gases Total GWP (kg CO
2
-eq)
R-134a 100% HFC-134a 1300