LG GR-K16SLQ Скачать руководство пользователя страница 5

Страница: 5 / 58

Safety Warnings and Cautions

Caution

Do not place bottles or cans in the storage.

• There is a possibility they could freeze, causing

the container to burst. This could present a
hazard in the form of broken glass or sharp
edges.

Always use exact replacement parts.

• Make certain replacement parts are the correct

part by part number and model number.
Ensure that voltage, current, and temperature
ratings are correct for the application.

During repairs, be sure all connectors are
tight and wires are properly routed.

• Loose wires could be damaged, causing shock

or fire hazards.

Be sure the power cord is undamaged.

• Do not bend, twist, pull, or damage the cord. It

could result in fire or electrical shock.

During repairs, remove all dust and foreign
materials from the work area.

• Keeping these areas clean makes work easier

and will prevent problems like overheating, fire,
and short circuits.

Allow time for resetting if you unplug the
storage.

• If you unplug the storage during repair, wait 5

minutes before plugging it in and restarting it.
Otherwise, you might cause compressor
failure.

5 min

Rated Parts

Содержание GR-K16SLQ


























































Результаты поиска

Содержание GR-K16SLQ

Отзывы:

Бренды по названию

Популярные бренды

LG GR-K16SLQ, Техническое руководство

Результаты поиска

Содержание GR-K16SLQ

Отзывы:

Бренды по названию

Популярные бренды