background image

Operating Instruction

Owner’s Manual 

23

ENGLISH

Fan speed is on low.

Fan speed is on medium.

Fan speed is on high.

CHAOS Air

The up/down airflow (Vertical Airflow) can be
adjusted by using the remote control.

1. Press the Start/Stop button to start the unit.

2.Open the door on the remote control. 

Press Chaos Swing button and the louvers will
swing up and down. Press the Chaos Swing
button again to set the vertical louver at the
desired airflow direction.

❏ 

If you press the CHAOS swing button, the vertical
airflow direction is changed automatically based on the
CHAOS algorithm to distribute the air in the room
evenly and at the same time to make the human body
feel most comfortable, as if enjoying a natural breeze.

❏ 

Always use the remote control to adjust the up/down
airflow direction. Manually moving the vertical airflow
direction louver by hand could damage the air
conditioner.

❏ 

When the unit is shut off, the up/down airflow direction
louver will close the air outlet vent of the system.

To adjust left/right(Horizontal Airflow) direction

Ensure unit is turned off before 

adjusting the horizontal airflow 

direction control. 

Carefully open vertical louver to 

allow access to the horizontal airflow direction.

Adjust the left/right airflow direction by hand.

NOTICE

Air Circulation Mode

Circulates the room air without cooling or heating.

1. Press the Start/Stop button. the unit will respond with a beep.

2. Open the door on the remote control. Press the Air Circulation button. Close the door on the

remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed is
shifted from low to CHAOS and back to low again.

CHAOS Air

economizes power consumption and prevents overcooling. The fan speed is automatically

changed from high to low or vice versa, depending on the ambient temperature.

NOTICE

Vertical Airflow Direction Control

Содержание GoldStar GSI120CE






























Отзывы: