TROUBLESHOOTING GUIDE
THE ICEMAKER IS NOT PRODUCING ICE OR ICE CUBES ARE FREEZING TOO SLOWLY
The freezer temperature is cold enough to produce ice.
Wait 24 hours after hook-up for ice production. See the
SETTING THE CONTROL
section.
Door left open.
Check to see if something is holding the door open.
THE DOORS ARE DIFFICULT TO OPEN
The gaskets are dirty or sticky.
Clean gaskets and the surfaces that they touch. Rub
a thin coat of appliance polish or kitchen wax on the
gaskets after cleaning
The door is reopened within a short time after having
When you open the door, warmer air enters the
been opened.
refrigerator. As the warm air cools, it can create a
vacuum. If the door is hard to open, wait 5 minutes
to allow the air pressure to equalize, then see if it
CUBES PRODUCED BY ICEMAKER ARE TOO SMALL
Smaller cube size level is selected.
Select larger cube size using cube size selector.
Water shutoff valve connecting refrigerator to water
Call a plumber to clear the valve.
line may be clogged.
Check if...
Then...
Check if...
Then...
Check if...
Then...
opens more easily.
AUTOMATIC ICEMAKER DOES NOT WORK
Icemaker power switch in the
O (off)
position.
Move the switch to the
I (on)
position.
Water supply turned off or not connected.
See the
CONNECTING THE WATER LINE
section.
Freezer compartment too warm.
Wait 24 hours for the freezer to reach its ideal
Piled up cubes in the storage bin cause the icemaker
Level cubes by hand or shake the bin occasionally.
to shut off.
Check if...
Then...
temperature.
TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP
The air vents are blocked. Cold air circulates
Locate air vents by using your hand to sense airflow and
from the freezer to the fresh food section and
move all packages that block vents and restrict airflow.
back again through air vents in the wall dividing
Refer to
ENSURING PROPER AIR CIRCULATION
the two sections.
section for the location of air vents.
Check if...
Then...
25
Содержание GM-L273UQGM
Страница 29: ... MFL58393903 ...