LG / GD1329QES Скачать руководство пользователя

Страница: 45 / 48

STACK MACHINE INSTALLATION INSTRUCTIONS

3. Stacking the machine

- Install two sliding brackets on the top plate of lower washer.

- Remove the legs from the leg brackets.

- Remove the four(4) leg brackets from the bottom of upper dryer.

- Assemble the four(4) slide pads on the base.

- Lift and stack the upper dryer on the lower washer.

- Set the rear of the upper dryer and the rear of the lower washer in the same position.

- Push the upper dryer matching the slide & stacking bracket to make upper and lower front parallel.

- Install the stacking bracket at the rear of the stacked dryer and washer.

- Assemble the six(6) screw to fix the lower machine and upper dryer.

*Security bracket installation (Only coin model)

- Install two security bracket on the panel frame and top plate in the lower

washer.

- Install one security bracket on the lower panel frame in the upper dryer.

Please refer to Service Manual for detail to explain how to stack and fix the machine

NOTE

Содержание / GD1329QES

















































Результаты поиска

Содержание / GD1329QES

Отзывы:

Похожие инструкции для / GD1329QES

Бренды по названию

Популярные бренды

LG / GD1329QES, Руководство пользователя

Результаты поиска

Содержание / GD1329QES

Отзывы:

Похожие инструкции для / GD1329QES

Бренды по названию

Популярные бренды