background image

3

IMPORTANT SAFETY INSTRUCTIONS 

READ ALL INSTRUCTIONS BEFORE USE 

w

WARNING

 

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, 

electric shock, or to prevent property damage, injury to persons, or death.

 

   Your Safety and the safety of others is very important.

   We have provided many important safety messages in this manual and on your appliance. 

Always read and obey all safety messages.

This is the safety alert symbol. 

This symbol alerts you to potential hazards that can kill or hurt you and others.

   All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.
   These words mean:

 w

DANGER

  You can be killed or seriously injured if you don’t immediately follow instructions.

 w

WARNING

 

   You can be killed or seriously injured if you don’t follow instructions. All safety messages will tell you what the 

potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions  

are not followed.

BASIC SAFETY PRECAUTIONS

w

WARNING

 

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, 

including the following:

w

IMPORTANT SAFETY INSTRUCTIONS

• Read all instructions before using the dryer.
•  Before use, the dryer must be properly installed as 

described in this manual.

•  Do not place items exposed to cooking oils in your 

dryer. Items contaminated with cooking oils may 

contribute to a chemical reaction that could cause a 

load to catch fire.

•  Do not dry articles that have been previously cleaned 

in, washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, or other flammable or explosive 

substances as they give off vapors that could ignite or 

explode.

•  Do not reach into the dryer if the drum or any other 

part is moving.

•  Do not repair or replace any part of the dryer 

or attempt any servicing unless specifically 

recommended in this Use and Care Guide or in 

published user-repair instructions that you understand 

and have the skills to carry out.

• Do not tamper with controls.
•  Before the dryer is removed from service or discarded, 

remove the door to the drying compartment.

•  Do not allow children to play on or in the dryer. Close 

supervision of children is necessary when the dryer is 

used near children.

•  Do not use fabric softeners or products to eliminate 

static unless recommended by the manufacturer of 

the fabric softener or product.

•  Do not use heat to dry articles containing foam rubber 

or similarly textured rubber-like materials.

•  Keep area around the exhaust opening and adjacent 

surrounding areas free from the accumulation of lint, 

dust, and dirt.

•  The interior of the dryer and exhaust vent should be 

cleaned periodically by qualified service personnel.

•  Do not install or store the dryer where it will be 

exposed to the weather.

•  Always check the inside of the dryer for foreign 

objects.

• Clean lint screen before or after each load.
•  Do not store plastic, paper, or clothing that may burn 

or melt on top of the dryer during operation.

•  

WARNING:

 This product contains chemicals known 

to the State of California to cause cancer and birth 

defects or other reproductive harm. 

Wash hands after 

handling.

Содержание / GD1329QES

















































Отзывы: