LG GCW1069CS Скачать руководство пользователя страница 21

Страница: 21 / 72

OPERATING YOUR WASHER

OPERATING YOUR WAShER

NOTE

• When the card balance is not enough, machine dis-

plays the card balance for 5 seconds and then displays

message repetitively

NOTE

• The machine will not start until sufficient coins are

inserted.

❋

Do not work any button and stop the washer

(When the washer is operating) or (when a cycle is in
progress)

1. Ready mode

1) Coin / Card type

– The cycle LEDs flash at the same time, when the

price of cycles are equal.

2) OPL type

– The cycle LEDs is lit at the same time, and displayed

‘PUSH’.

4. Add super wash

Wash time or rinse cycle can be added when additional

coin is inserted or a valid cash card is entered.

5. Change course

You cannot change the course while the machine is

running.

6 . Cycle finish

The machine stops and LED display shows “ ”

with beeper sound.

2. Insert card/coin (not for OPL type)

Insert a cash card that has a sufficient balance.

The card balance should be more than the programmed
vend price for a selected cycle.

3. Select the cycle

Press the desired button and press the start button.

The display LED will show the remaining time and the
selected cycle starts.

• Select cycles designed for different types of fabric and soil

levels.

• Insert a sufficient amount of change that is more than

the programmed vend price for the selected cycle.

CYCLE

Fabric type

Wash/Rinse

Temp.

Whites

Cotton, linen, towels, shirts,

sheets

Hot/Cold

Colors

Mixed loads, work clothes,

jeans, shirts

Warm/ Cold

Perm.Press

Dress shirts, pants, wrinkle-

free clothing, cotton/poly blend

clothing, tablecloths

Warm/ Cold

Delicates

Dress shirts, blouses, nylons,
sheer or lacey garments

Cold/ Cold

WARNING

• To reduce the risk of fire, electric shock, or injury to

persons,

read the IMPORTANT SAFETY INSTRUC-

TIONS before operating this appliance.

Содержание GCW1069CS









































































Результаты поиска

Содержание GCW1069CS

Отзывы:

Похожие инструкции для GCW1069CS

Бренды по названию

Популярные бренды

LG GCW1069CS, Руководство пользователя

Результаты поиска

Содержание GCW1069CS

Отзывы:

Похожие инструкции для GCW1069CS

Бренды по названию

Популярные бренды