Three beeps will sound at 30 second intervals if either of the refrigerator
doors remain open or are not completely closed after 1 minute.
your service provider if the 3 warning beeps
The inbuilt diagnostic function automatically detects certain faults during the
refrigerators operation.
If a fault is detected during operation, the display cannot be changed by pressing any
button. The display will then show an Error indication and the refrigerator will
continue to operate at a predetermined setting. Should an error be displayed,
do not turn off the refrigerator as it will increase the time it takes for the
Seviceman to diagnose any possible fault.
may need to be adjusted. This must be done by
an authorised service provider.
Lumped ice can also result if the freezer set temperature is too warm.
It can also cause the ice dispensing to temporarily stop if the thermal protection
within dispensing motor is activated. Should this occur, allow at least one hour
before trying to dispence ice after removing any lumped cubes.
During a prolonged power failure, the ice in the storage bin may melt and flow into
the freezer comparment or leak from the dispenser funnel. Should this begin to occur,
remove the ice storage bin and empty out all the ice. It should then be dried with a soft
cloth along with any other leakage and refitted into the freezer.
, provided that the conditions are favourable and the ice maker power
doors.
switch is in the on position.
Содержание GCD247SL
