LG GC-L207TLQK.CGSQSTG Скачать руководство пользователя страница 67

Страница: 67 / 100

TROUBLE DIAGNOSIS

- 11

Problems

Causes

Checks

Measures

Remarks

Ice in the freezer 1) Bad cooling air circulation.

- Check food storage conditions

- Be acquainted with how to use.

- Check the p

arts related

compartment.

- Intake port is colgged in the freezer

visually.(Check clogging at intake

- Check defrost (Check ice on the

to defro

sting if the

- Surface of fan

compartment.

and discharging port of cooling air.)

evaporator and pipes after forced

problem is caused by

grille.

- Discharging port is Clogged.

- Check food occupation ratio in

defrosting).

the faulty defrosting.

- Wall of freezer

- Too much food is stored.

volume(Less than 75%).

compartment.

- Bad defrosting.

- Check frost on the evaporator after

- Cool air

dissembling shroud and fan grille.

discharging port.

- Check icing at intake port of

- Basket(rack)

refrigerator compartment.

area.

- Food surface.

2) Bad freezer compartment door

- Check gasket attachment

- Correct the gasket attachement

- Replace when it can n

- Icing in the

- Faulty gasket

conditions.

conditions and replace it.

be repaired.

shute.

- Faulty assembly

- Check door assembly conditions.

- Door assembly and replacement.

3) Over freezing in the freezer

- Refrigerator operates pull down.

-Replace defective parts.

compartment.

(Check if it is operated

- Faulty MICOM.

intermittently)

- The Temperature of freezer

compartment is satisfactory, but

over freezing happens in the

refrigerator compartment even

though the notch is set at "weak".

4) Bad defrosting.

- Check frost on the evaporator after

- Check parts related to defrosting.

- Heater wire is cut.

dissembling shroud and grille.

- Check defrosting.(Check ice on the

- Faulty defrost sensor.

- Check ice on the intake port in the

evaporator and pipes after forced

- Defrosting cycle

refrigerator compartment.

defrosting.)

5) User is not familiar with how to

- Check food holds door open.

- Be acquainted with how to use.

use.

- Check ice on the ice tray.

- Door opens.

- High moisture food(water) is stored.

Содержание GC-L207TLQK.CGSQSTG





































































































Результаты поиска

Содержание GC-L207TLQK.CGSQSTG

Отзывы:

Похожие инструкции для GC-L207TLQK.CGSQSTG

Бренды по названию

Популярные бренды

LG GC-L207TLQK.CGSQSTG, Руководство по обслуживанию

Результаты поиска

Содержание GC-L207TLQK.CGSQSTG

Отзывы:

Похожие инструкции для GC-L207TLQK.CGSQSTG

Бренды по названию

Популярные бренды