36
MAINTENANCE
EN
2
Pull the pipe out from the water filter cap until
the colored line
a
is visble.
3
Push the pipe into the water fitler cap, making
sure the end is fully sealed.
4
Tighten the screw cap until the colored line in
the water filter is no longer visible.
5
Press and hold the
Water Filter
button for
three seconds. That resets the
Replacement
Filter
icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
Push fit connector type
*1
1
Remove the screw cap.
2
Pull the pipe out from the water fitler.
3
Push the pipe into the water fitler, making sure
the end is fully sealed.
4
Insert the screw cap until the colored line in the
water filter is no longer visible.
5
Press and hold the
Water Filter
button for
three seconds. That resets the
Replacement
Filter
icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
CAUTION
• Failure to replace filters when required or using
non LG authorised water filters can cause the
filter cartridge to leak and result in property
damage.
global_main.book.book Page 36 Wednesday, May 20, 2020 3:38 PM
Содержание GC-J247SLUV
Страница 44: ...Memo global_main book book Page 44 Wednesday May 20 2020 3 38 PM ...
Страница 45: ...Memo global_main book book Page 45 Wednesday May 20 2020 3 38 PM ...
Страница 82: ... وإﺻﻼﺣﮭﺎ اﻷﻋطﺎل اﺳﺗﻛﺷﺎف اﻟﺧدﻣﺔ ﻋﻠﻰ ﻟﻠﺣﺻول اﻻﺗﺻﺎل ﻗﺑل 34 ar_main book book Page 3 Wednesday May 20 2020 3 35 PM ...