LG GC-309B, Руководство по эксплуатации

Страница: 5 / 53

INSTALLATION
4
Installing on a firm and flat surface
- Unstable installation is the main reason of
vibration and noise.
- when the refrigerator is installed unstably, it can
be stabilized by adjusting the adjustable foot.
- Slightly rising the front part of the refrigerator
allow you to close the door very easily.
- When installed on a carpet or floor,please put a
firm mat under the refrigerator otherwise the
bottom part will change colour.
• Keep an appropriate distance between the wall
- To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space on
both the sides as well as top and maintain at least
2 inches (5 cm) from the rear wall.
- A smaller gap will restrict the operation of the
refrigerator, which may result in an increase in
power.
• Installing in a less humid environment
- Do not install the refrigerator in a humid place or
where water can easily be splashed.
- If the refrigerator is installed in a humid
environment,it will go moldy. This will lower
insulation property and cause electricity leakage
• Avoid installing near heat and gas
- High temperature will lower the refrigeration
and increase the power consumption.
- Installing near gas or smoke will change the
surface colour of the refrigerator.
Slightly rise the
front part
Keep distance
More than 5cm
rear
Adjustable Foot
mat
Humidity
Downloaded from Fridge-Manual.com Manuals