Registration
The model and serial number are found on the rear of this unit. This number is unique to this unit and not
available to others. You should record requested information here and retain this guide as a permanent
record of your purchase. Staple your receipt here.
Date of Purchase :
Dealer Purchased From
:
Dealer Address :
Dealer Phone No. :
Model No. :
Serial No. :
It is recommended to install the earth to prevent electric shock in
case of electricity leakage.
How to connect the earth wire:
•
Connect the earth wire's metal ring end to the earth screw
on the back of the refrigerator.
Do not connect the earth wire to the following locations.
•
Gas pipe
It could produce sparks which lead to fire and explosion.
•
Telephone earth wire and lightning rod
It is dangerous during lightning.
•
Water pipe and water tap
The earth wire connection will not work when the middle of the water pipe is made of plastic.
When installing the product in a humid or wet location, you must install the earth wire.
Ex)
• Unfloored or dirt floored room (Room with dirt and no floor), concrete floor
• Location where it can get wet such as near the sink
• Location where water can leak or is humid such as basement
• Other wet or humid location
Especially, for locations where it always get wet such as near the restaurant sink, you are obligated by
the law to install a circuit breaker in addition to the earth wire.
After consulting with your retailer or electric construction company, you must do the earth wire
construction (Type 3 earth construction). Please note that earth construction could incur extra fees.
•
Peel off the cable sheath/insulation at the other end of the earth wire. Attach the peeled wire
to a metal screw/nail and then drive it through the wall or ground.
If it is connected to a metal water pipe, it could cause someone to be electrocuted.
