20
EN
Icemaker
This is where ice is manually produced and stored.
NOTE
•
You can remove the ice tray or ice storage bin
if you do not use it to create more space inside
the freezer.
Making Ice
1
Hold the handle of the ice tray and pull it out.
2
Fill the ice tray with water up to the water
level.
3
Place the ice tray back to its position carefully
not to spill water on the floor.
WARNING
•
Fill with potable water only.
CAUTION
•
Check whether there is any ice remaining in the
ice tray before putting water into it.
•
Do not close the freezer door roughly after filling
the ice tray with water.
NOTE
•
If the ice tray is overfilled, the ice may stick
together and be difficult to remove.
•
Press the
Express Freeze
button on the control
panel to make ice quickly.
Taking Out Ice
1
Rotate the ice separation handle on the
icemaker clockwise.
2
Lift the ice storage bin slightly and remove.
CAUTION
•
If you open and close the freezer door
frequently, it may take longer for water to freeze.
•
The time it takes for water to freeze may vary
according to the season.
•
The temperature inside the appliance can
take up to 24 hours to stabilize after initial
installation. Water may take longer to freeze
because of this.
•
Be careful when handling the ice as the edges
of the ice may be sharp.
NOTE
•
Do not store ice that has not frozen completely.
Unfrozen water could cause the ice to clump
together.
•
When getting ice, remove the ice storage bin
gently so that the slide stopper doesn’t break.
•
Fill the ice tray up to the water line. If water goes
over the water line, it could spill into the ice
storage bin, making it difficult to remove the ice.
