23
Operation
Always empty the drawers before removing them.
To remove any drawer of the freezing compartment, proceed as follows:
1. Pull the drawer all the way out as far as it will go.
2. Raise it at the front and continue to pull it out.
To install any drawer back into the freezing compartment, proceed in the
reverse sequence:
1. Place the drawer onto the guides at an angle 45°;
2. Lower the front part of the drawer in parallel to the guides as you
push it in.
3. Push the drawer all the way in.
1
2
2
3
1
Do not apply excessive force to remove the drawers and shelves – this
may result in damage of the refrigerator.
The warranty does not cover mechanical damages (cracks, shears,
dents, scratches, chips,etc.) caused by violation of the
refrigerator storage,transportation, operation, and maintenance instructions,
and by application of excessive force.
NOTE
REMOVAL AND INSTALLATION OF DRAWERS IN FREEZING
COMPARTMENT
CAUTION!
Do not apply excessive force to remove the drawers and shelves – this
may result in damage of the refrigerator.
ICE PREPARATION
Fill the ice tray with water and place
it to the freezing compartment.
To remove ice cubes, hold the tray on ends
and slightly bend it.
If ice cubes are required as soon as possible,
activate the "
EXPRESS FREEZE
" function.
To easily remove cubes, water the tray in
advance.
Fill with potable water only.
WARNING
Содержание GB-310NPL
Страница 2: ......
Страница 15: ...Introduction 15 ...