27
Introduction
Important Safety Instruction
Warning
Precaution
This fridge-freezer must be properly installed and
located in accordance with the Installation
Instruction before it is used.
Never unplug your fridge-freezer by pulling on
the power cord.
Always grip plug firmly and pull
straight out from the outlet.
When moving your appliance away from the wall,
be careful not to roll over or damage the power
cord.
After your fridge-freezer is in operation, do not
touch the cold surfaces in the freezer
compartment, particularly when hands are damp
or wet.
Skin may adhere to these extremely cold
surfaces.
Pull out the power plug prior to cleaning the fridge-
freezer. Never damage, serverely bend, pull out, or
twist the power cord because power cord damage may
cause a fire or electronic shock. Never place glass
products in the freezer because they may be broken
when their inner contents are frozen.
Do not directly spray water inside or outside the
fridge/freezer.
There is a risk of explosion or fire.
Do not insert the power plug with wet hands.
You may receive an electric shock.
Do not put a container filled with water on top of
the appliance.
If the water spills on to any electrical parts, it may lead
to fire or electric shock.
Do not install the fridge/freezer in a damp place,
where it could be splashed with water.
Incorrect insulation of the electrical parts may cause an
electric shock or file.
Downloaded from Fridge-Manual.com Manuals
29
Introduction
Important Safety Instruction
Warning
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in
the appliance require special disposal procedures.
When disposal, please consult with service agent or a
similarly qualified person.
This appliance contains a small amount of isobutane
refrigerant (R600a), natural gas with high
environmental compatibility, but it is also
combustible. When transporting and installing the
appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged.
Refrigerant squirting out of the pipes could ignite
or cause an eye injury. If a leak is detected, avoid
any naked flames or potential sources of ignition
and air the room in which the appliance is standing
for several minutes.
In order to avoid the creation of a flammable gas air
mixture if a leak in the refrigerating circuit occurs, the
size of the room in which the appliance may be sited
depends on the amount of refrigerant used. The room
must be 1m
2
in size for every 8g of R600a refrigerant
inside the appliance. The amount of refrigerant in your
particular appliance is shown on the identification plate
inside the appliance.
Never start up an appliance showing any signs of
damage. If in doubt, consult your dealer.
Downloaded from Fridge-Manual.com Manuals
31
Introduction
Identification of Parts
Note
If you find some parts missing from your unit, they
may be parts only used in other models. (i.e. the
“Miracle Zone” is not included in all models)
Downloaded from Fridge-Manual.com Manuals
33
Operation
Temperature Control
Display Panel For
Temperature Control
Your fridge-freezer has controls that let you regulate the
temperature in the fridge and freezer compartments.
Temperature Adjustment Button for
Refrigerator Compartment
Temperature Adjustment Button for
Opti Fresh Zone Compartment
ON/OFF Power Button
Temperature Adjustment Button
for Freezer Compartment
Super Freezer Button
Vacation Button
< Exterior Type 1 >
< Exterior Type 2 >
< Interior Type>
Min
Min
Max
Max
Min
Min
Max
Max
Temperature Adjustment Button for
Refrigerator Compartment
Lock Button
ON/OFF Power Button
Temperature Adjustment Button
for Freezer Compartment
Super Freezer Button
Vacation Button
ON/OFF Power Button
Temperature Adjustment Button for
Refrigerator Compartment
Adjusting the
temperatures and
functions
Downloaded from Fridge-Manual.com Manuals
35
Operation
Opti Fresh Zone
Temperature
Transition Corner
(Optional)
• By pressing the button, store meat (at relatively low
conservation temperature) or other types of food to be
defrosted ,raw fish,etc...
The temperature of the Opti fresh zone’s compartment
is always okay.
• Pressing “OPTI ZONE” button start operation with lamp
ON and pressing it again stops the operation.
< Exterior Type 1 >
< In selecting "Opti Fresh Zone ON" >
< In selecting "Opti Fresh Zone OFF" >
Downloaded from Fridge-Manual.com Manuals
37
Operation
Self Test
Lock
ON / OFF
FUNCTION
• This function automatically detects failure when failure
is found in product during the use of refrigerator.
• If the failure occurs at product and it does not operate
by pressing any button and normal indication is not
done, do not turn the power off and immediately
contact with the local service center.
• A lot of time is needed for service engineer to detect
the failed part by turning it off.
• Pressing this button stops operation of other buttons.
• ”Locking” or “Un-Locking” is repeated whenever
pressing the LOCK button. (For “Locking” or “Un-
Locking” press the “LOCK” button for 3 secs.)
• When ‘LOCK’ is activated, pressing the other buttons
would not work.
• Press the ON/OFF button over 3 seconds to switch for
defrosting, cleaning and no use of long term.
• The outside lamp(display) is turned off.
• The inside lamp is ON, When open the door.
• Press the ON/OFF button over 3 seconds to switch the
appliance.
In selecting
"Lock ON"
In selecting
"Lock OFF"
