LG FV1410H3W Скачать руководство пользователя

Страница: 46 / 52

TROUBLESHOOTING

Appliance does not

operate.

Control panel has powered off due to inactivity.

• This is normal. Press the

Power

button to turn the appliance on.

Appliance is unplugged.

• Make sure that the cord is plugged securely into a working outlet.

Water supply is turned off.

• Turn the water supply tap completely.

Controls are not set properly.

• Make sure that the programme is correctly set. Close the door and press

the

Start/Pause

button.

Door is open.

• Close the door and make sure that nothing is caught under the door

preventing it from closing completely.

Circuit breaker/fuse is tripped/blown.

• Check house circuit breakers/fuses. Replace fuses or reset breaker. The

appliance should be on a dedicated branch circuit. The appliance will

resume the programme where it stopped once power is restored.

Appliance does not

operate.

Control needs to be reset.

• Press the

Power

button, then reselect the desired programme and press

the

Start/Pause

button.

Start/Pause was not pressed after a programme was set.

• Press the

Power

button, then reselect the desired programme and press

the

Start/Pause

button. The appliance is turned off if the

Start/Pause

button is not pressed within a certain time.

Extremely low water pressure.

• Check another tap in the house to make sure that household water

pressure is adequate.

Appliance is heating the water or making steam.

• The drum may stop operating temporarily during certain cycles, while

water is safely heated to a set temperature.

Appliance stops for a

few minutes and then

restarts.

A motor protection device has been activated to prevent overheating of

the motor.

• This is normal. If the motor protection device activates, the appliance will

stop for a few minutes and then start again.

Buttons may not

function properly.

The Child Lock option is activated.

• Deactivate the

Child Lock

option if necessary.

Door does not open.

The door cannot be opened for safety reasons once the appliance starts.

• This is normal. You can safely open the door after

turns off.

Symptoms

Possible Cause & Solution

global_main.book.book Page 46 Wednesday, January 26, 2022 10:19 AM

Содержание FV1410H3W





















































Результаты поиска

Содержание FV1410H3W

Отзывы:

Похожие инструкции для FV1410H3W

Бренды по названию

Популярные бренды

LG FV1410H3W, Руководство пользователя

Результаты поиска

Содержание FV1410H3W

Отзывы:

Похожие инструкции для FV1410H3W

Бренды по названию

Популярные бренды