LG FH069FD2PS Скачать руководство пользователя страница 69

Страница: 69 / 76

MAINTENANCE

Cleaning the water inlet filters

Clean the water inlet filters periodically to

prevent clogging. Take extra care to clean the

water inlet filters for areas using hard water.

Water may not be supplied if there are foreign

objects, such as rust, sand, or stones in the

water inlet filters.

Pull out the plug to turn off the washing

machine.

Turn off the faucets connected with the

water inlets.

Remove the water inlets.

Pull out the water inlet filter.

Remove foreign objects from the water filter

inlet.

- Soak the water filter inlets in white vinegar

or a lime scale remover or use a toothbrush

to remove foreign objects and rinse

thoroughly.

Press the water filter inlets back into place.

Reattach the water lines to the washing

machine.

Inlet Filter

NOTE

•

message will blink on the display when

the water pressure in the detergent drawer

is weak or an inlet filter is clogged with dirt.

Clean the inlet filter.

WARNING

• Unplug the power cord and turn off the

faucets before cleaning.

Failure to do so

may cause electric shock.

• Do not use the washing machine without

the inlet filters.

If you use the washing ma-

chine without the inlet filters it will cause

leaks and malfunction.

•

If you use the washing machine in an area

with hard water, the inlet filter may clog

due to lime buildup.

Содержание FH069FD2PS













































































Результаты поиска

Содержание FH069FD2PS

Отзывы:

LG FH069FD2PS, Руководство пользователя, Страница: 69 / 76

Результаты поиска

Содержание FH069FD2PS

Отзывы: