LG FH069FD2PS Скачать руководство пользователя страница 65

Страница: 65 / 76

PROGRAMMING MODE - TEST MODE

Entering set up

mode.

You will see LqC1

Button

Display

Press the

75°C (167°F)

or the

60°C (140°F)

button until

appears in the display.

Press

Start

button.

Display show the remaining time and Tub clean Start.

When the TUB CLEAN cycle is finished,

displayed with beeping.

Go back to ready mode.

1. Continue to set up the next mode.

2. Stop the change of setup value and go back to ready

mode.

• Coin type - Turn on/off toggle switch.

• Coin/OPL type - Push the 90°C (194°F) button

twice.

7. Tub clean -

To clean up the tub, please run the TUB CLEAN cycle.

NOTE

• Never load laundry while using TUB CLEAN. The laundry may be damaged or become con-

taminated. Make sure to clean the washer tub when it is empty.

•  Leave the door open after finishing the laundry to keep the tub clean.
•  TUB CLEAN should be repeated monthly.
•  Safely and conveniently secure the door slightly ajar with a magnetic door plunger. This will

promote air circulation and allow the interior of the machine to dry.

Содержание FH069FD2PS













































































Результаты поиска

Содержание FH069FD2PS

Отзывы:

LG FH069FD2PS, Руководство пользователя, Страница: 65 / 76

Результаты поиска

Содержание FH069FD2PS

Отзывы: