10
EN
Specifications
Model
F*V508*
Power Supply
220 - 240 V~, 50 Hz
Dimension
(Width x Depth x Height)
600 mm X 560 mm X 850 mm
Product Weight
63 kg
•
No further backflow protection required for connection to the water inlet.
Installation Place
Requirements
Before installing the appliance, check the following
information to make sure that the appliance should
be installed in a correct place.
Installation Location
•
Install the appliance on a flat floor. (Allowable
slope under the appliance: 1°)
•
Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
•
If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (850 X 600 mm) covered
with aluminium foil on the side facing the cooker
or stove must be inserted between the two
appliances.
•
Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of
a breakdown.
•
When installing the appliance, adjust all four feet
using the transit bolt spanner which makes the
appliance stable, and leave approximate
5 mm
for a clearance between the top of the appliance
and the underside of any worktop.
•
Additional clearance should have
100 mm
for
the wall and
20 mm
for rear, right and left side.
100 mm
20 mm
5 mm
20 mm
WARNING
•
This appliance must only be used for domestic
household purposes and should not be used in
mobile applications.
NOTE
•
If the appliance is installed on a raised platform,
it must be securely fastened in order to eliminate
the risk of falling off.
