30
EN
Wi-Fi Function
Communicate with the appliance from a
smartphone using the convenient smart features.
Washer Cycle
(Remote Start, Download Cycle)
Set or download any preferred cycle and operate by
remote control.
Tub Clean Coach
This function shows how many cycles remain
before It is time to run the
Tub Clean
cycle.
Energy Monitoring
Check the energy consumption of the recently used
cycles and monthly average.
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Various functions are available.
Push Alert
This function is to notify the status notification so
that the user can recognize the appliance status.
The notifications are triggered even if the
LG ThinQ
application is off.
NOTE
•
If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the
LG ThinQ
application and register it again.
•
The application is subject to change for
appliance improvement purposes without notice
to users.
•
Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle operation
so you know how much time is left in the cycle.
Using this function
1
Press the
Power
button.
2
Put the laundry into the drum.
3
Press and hold
Remote Start
button for 3
seconds to enable this function.
4
Start a cycle from the
LG ThinQ
application on
your smartphone.
NOTE
•
Once this function is enabled, you can start
a cycle from the
LG ThinQ
smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
•
When this function is turned on, the door is
automatically locked.
Disabling this function
When this function is activated, press and hold
Remote Start
button for 3 seconds to disable this
function. This function must be turned off, so that
the appliance can be used manually.
Download Cycle
Download a new and special cycle that is not
included in the basic cycles on the appliance. A
variety of specialty cycles specific to the appliance
can be downloaded to the successfully registered
appliances. Only one cycle can be stored on
the appliance at a time. Once cycle download is
completed in the appliance, the product keeps the
downloaded cycle until a new cycle is downloaded.
