background image

20

TROUBLESHOOTING

ENGLISH

Problem

Possible causes

Corrective action

The air conditioner does not
generate cool air.

Air is not circulating
properly.

Make sure that there are no curtains,
blinds or furniture blocking the front of the
air conditioner.

The air filter is dirty.

Clean the air filter once every 2 weeks.
See “Cleaning Air Filter” for more infor-
mation.

The room tempera-
ture is too high.

In summer, it may take some time to cool
indoor air. In this case, select the jet cool
operation to cool indoor air quickly.

Cold air is escaping
from the room.

Make sure that no cold air is escaping
through ventilation points in the room.

The desired tempera-
ture is higher than the
set temperature.

Set the desired temperature to a level
lower than the current temperature.

There is a heating
source nearby.

Avoid using a heat generator such as an
electric oven or a gas burner while the air
conditioner is in operation.

Air circulation opera-
tion is selected.

In the air circulation operation, air blows
from the air conditioner without cooling or
heating the indoor air. Switch the opera-
tion mode to the cooling operation.

It is not possible to adjust
the fan speed.

The auto operation,
jet operation or dehu-
midifying operation is
selected.

In some operation modes, such as the jet
or dehumidifying operation modes, you
cannot adjust the fan speed. Select an op-
eration mode in which you can adjust the
fan speed.

It is not possible to adjust
the temperature.

The air circulation op-
eration or jet opera-
tion is selected.

In some operation modes, such as the air
circulation or jet operation mode, you can-
not adjust the temperature. Select an op-
eration mode in which you can adjust the
temperature.

Содержание E09SQ






















Отзывы: