5
Troubleshooting
Troubleshooting
22
Trouble
shoo
ting
5
Troubleshooting
Symptom
Cause
Solution
No power
The power cord is disconnected.
Plug the power cord.
The unit does not
start playback.
An unplayable disc is inserted.
Insert a playable disc. (Check the disc type and
regional code.)
The rating level is set.
Change the rating level.
The remote
control does not
work properly.
The remote control is not pointed
at the remote sensor on the unit.
Point the remote control at the remote sensor
of the unit.
The remote control is too far from
the unit.
Operate the remote control closer to the unit.
Poor picture
quality and sound
distortion
Fingerprints and dust are stained
on the disc.
Wipe the disc from the center to out with
a clean cloth. Do not use strong solvents
(alcohol, benzine, thinner, commercially
available cleaners)
No picture
The TV is not set to receive the
signal from the unit.
Select the appropriate video input mode on
the TV.
The video cable is not connected
securely
Connect the video cable securely.
The TV does not accept the
resolution that is set on the unit.
It can be changed using the resolution of
SETUP menu.
No sound
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
Select the correct input mode of the audio
amplifier.
The AUDIO options are set to the
wrong position.
Set the AUDIO settings to the correct position.
DV6T9H-SE.AESPLLK.indd 22
2011-08-30 �� 5:03:31
Содержание DV6T9H
Страница 2: ...DV6T9H SE AESPLLK indd 2 2011 08 30 5 03 28 ...
Страница 26: ...DV6T9H SE AESPLLK indd 26 2011 08 30 5 03 31 ...
