LG DT6101SAU, Инструкция по эксплуатации

Страница: 6 / 12

EN
6
6
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
or 120mm, the choice of which is left to the installer.
• Install the Flange ø 150 mm 9.
• Install the Dumper 10b ø 150 on the Flange ø 150 9.
To install a ø 120
• Install a reducer Flange 10a on the Dumper 10b.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove any activated charcoal filters.
ø 120
10b
9
10a
ø 150
10b
9
RECIRCULATION VERSION AIR OUTLET
• Cut a hole ø 155 mm in the wall unit over the hood.
• Insert the flange 9 on the hood body outlet.
• Connect the hood body outlet to the top part of the
wall unit using a rigid or flexible pipe ø 150 mm, to
be selected by the installer.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Fix the directional grille 8 on the recirculation air
outlet using the 2 screws 12e (2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have been
inserted.
12e
8
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..