41
ENGLISH
HOW TO uSE
Special Functions
The option buttons also activate special functions,
including Control Lock and Drum Light.
Select the option by pressing the option button. Press
and hold the option button for special features marked
with the asterisk (*), such as Control Lock.
* Control Lock
Use this option to prevent unwanted use of the dryer or
to keep cycle settings from being changed while the dryer
is operating. Press and hold the Wrinkle Care button for 3
seconds to activate or deactivate the Control Lock function.
The Control Lock icon will be shown in the display, and all
controls are disabled except the Power button.
NOTE
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned
off to run another cycle. To deactivate Control Lock,
press and hold the Wrinkle Care button for three
seconds.
Cycle Settings and Options
Sensor dry cycles have preset settings that are selected
automatically. Manual dry cycles have default settings, but
you may also customize the settings using the cycle modifier
buttons. Press the button for that option to view and select
other settings.
Dry Level
Selects the level of dryness for the cycle. Press the Dry Level
button repeatedly to scroll through available settings.
• This option is only available with sensor dry cycles.
• The dryer will automatically adjust the cycle time. Selecting
More Dry or Very Dry will increase the cycle time, while Less
Dry or Damp Dry will decrease the cycle time.
• Use a Less Dry or Damp Dry setting for items that you wish to
iron.
Temp.
Adjusts the temperature setting from Ultra Low to High.
This allows precise care of your fabrics and garments. Press the
Temp. button repeatedly to scroll through available settings.
Time Dry
Allows you to manually select the drying time, from 20 to 60
minutes, in 10-minute increments. Use this for small loads or to
remove wrinkles. Use the More Time/Less Time buttons to add
or reduce the drying time in 1-minute increments.
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain option
buttons also feature a special function that can be activated by
pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1. Turn on the dryer and turn the cycle selector knob to select
the desired cycle.
2. Use the cycle modifier buttons to adjust the settings for that
cycle.
3. Press the cycle option buttons for the options you would like
to add. A confirmation message shows in the display.
4. Press the Start/Pause button to start the cycle. The dryer
starts automatically.
Wrinkle Care
Selecting this option will tumble the load periodically for up to
three hours after the selected cycle, or until the door is opened.
This is helpful in preventing wrinkles when you are unable to
remove items from the dryer immediately.
Signal
To turn the Signal off, press the Signal On/Off button. Press
again to turn the Signal back on.
Damp Dry Signal
With this option, the dryer signals when the load is
approximately 80% dry. This allows you to remove faster-
drying lightweight items or items that you would like to iron
or hang while still slightly damp.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the
Cycle Guide
for details.
MFL69702032_en_180118.indd 41
2018.1.18 1:43:11 PM
