17
Adjust the SETUP settings
Adjust the general settings
Auto Programming –
This option automatically scans and sets the available
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 19)
[All, Digital or Analog]: Select a broadcasting type which you want to scan
automatically.
[Start]: Start the channel scanning.
Program Edit–
This option allows you to add channels and edit preset
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 19)
[Add Channel]: Select the broadcasting type between [Digital] and [Analog]
and then press
v
v V
V
to select the channel and press ENTER to add the
selected channel.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 14)
Clock Set–
The clock must be set in order to use [Timer record].
[Auto]: Set the channel that broadcasts a clock signal and the clock will be
set automatically. If the clock that has automatically set is different with your
local clock, you can add more time using [Time Offset] option. (For example,
when summer time is started in local area.) Press
B
to select [Time Offset]
option. Press
v V
to select a value then press ENTER (0, 30, 60, 90, 120).
Select “0” if the clock that has automatically set is identified with your local
clock. You can select the [Time Zone] option to set a time relative to GMT.
[Manual]: If there is no channel that broadcasts a clock signal in your area,
you can set the time and date manually.
TV Aspect –
Selects the aspect ratio of the connected TV. If the resolution is
set to 720p or 1080i, [TV Aspect] will be disable in the setup menu.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen. Cuts off the portions at the sides
that do not fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
Power Save mode –
Selects whether this unit is in power save mode when the
power is turned off. This option is not available when a timer recording is set.
[ON]: The front panel display is off and only signals arriving at the antenna
input are passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].
Antenna Feed 5V –
If you are using an indoor antenna, use one with a signal
amplifier rated at DC 5V, 100mA and set this option to [ON].
[ON]: Power is supplied to the connected antenna.
[OFF]: The unit does not supply power to the connected antenna.
Initialization –
You can reset the unit to its original factory settings.
[Factory Set]: You can reset the unit to all its factory settings. Some options
cannot be reset (DVD Rating, Parental Guidance, Password, and Area
Code). The auto setup menu appears on the screen after the factory settings.
DR386D-W.BAUSLLK_ENG 6/16/08 10:38 AM Page 17
Содержание DR386D
Страница 40: ...DR386D W BAUSLLK_ENG 6 16 08 10 38 AM Page 40 ...
