Operating
33
Oper
ating
4
Sleep Timer Setting
Press
SLEEP
on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn off. (You can see
the following order, 180 ->150 -> 120 -> 90 -> 80 ->
70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10)
To cancel the sleep function, press
SLEEP
repeatedly until the display window get bright.
y
You can check the remaining time before
the unit turns off. Press
SLEEP
. The
remaining time appears in the display
window.
y
Sleep function will work after dimmer
function.
,
Note
Dimmer
Press
SLEEP
once. The display window will
be darkened by half. To cancel it, press
SLEEP
repeatedly until the display window get bright.
Radio Operations
Be sure that FM aerial is connected. (Refer to the
page 19.)
Listening to the radio
1. Press
P
FUNCTION
until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press and hold
TUNING (-/+)
for
about 2 seconds until the frequency indication
starts changing, then release. Scanning stops
when the unit tunes in a station.
Manual tuning: Press
TUNING (-/+)
repeatedly.
3. Adjust the volume by pressing
VOL (+/-)
.
Presetting the Radio Stations
You can preset 50 stations for FM .
Before tuning, make sure to turn down the volume.
1. Press
P
FUNCTION
until FM appears in the
display window.
2. Select the desired frequency by pressing
TUNING (-/+)
.
3. Press
b
ENTER
. A preset number will blink in
the display window.
4. Press
/-)
to select the preset number
you want.
5. Press
b
ENTER
. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
/-)
.
Deleting all the saved stations
1. Press and hold
CLEAR
for two seconds.
“ERASEALL” will blink on the display window.
2. Press
CLEAR
to erase all saved radio stations.
Improving poor FM reception
Press
d
PLAY, MONO/STEREO
. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
