10
iNTrODuCiNg YOur DrYEr
Control panel features
Following are instructions for starting and using your new dryer. Please refer to specific sections of this
manual for more detailed information.
w
WARNING :
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the Important Safety Instructions, before operating this dryer.
Button
Description
POWER ON/OFF BUTTON
- Press to turn the dryer ON. Press again to turn the dryer OFF.
NOTE :
Pressing the ON/OFF button during a cycle will cancel that cycle and any
load settings will be lost.
CYCLE SELECTOR KNOB
- Turn this knob to select the desired cycle. Once the desired cycle has been
selected, the standard presets will be shown in the display. On MANUAL DRY
cycles, these settings can be adjusted using the cycle setting buttons any time
before starting the cycle.
START/PAUSE BUTTON
- Press this button to START the selected cycle. If the dryer is running, use this
button to PAUSE the cycle without losing the current settings.
NOTE :
If you do not press the START/PAUSE button to resume a cycle within four
minutes, the dryer turns off automatically.
More Time/Less Time BUTTONS
- To adjust the drying time, use these buttons with MANUAL DRY, Time Dry, and
Steam Fresh™ cycles, as well as the Reduce Static and Easy Iron options. Press the
More Time button to increase the selected manual cycle time by a minute; press
Less Time to decrease the cycle time by a minute.
CYCLE MODIFIER BUTTONS
- Use these buttons to select the desired cycle settings for the selected cycle. The
current settings are shown in the display. Press the button for that option to view
and select other settings.
OPTION BUTTONS
- The OPTION buttons allow you to select additional cycle options. Certain buttons
also allow you to activate special functions by pressing and holding the button
for three seconds.
Operation
LED Display
Cycle Selector Knob
Power
Button
Start/Pause
Button
Dry Level
Button
Temp. Control
Button
Time Dry
Button
Signal
Button
MFL67731041_en_141023.indd 10
2014.10.23 11:17:21 AM