LG DLEX8500V Скачать руководство пользователя

Страница: 37 / 51

ENGLISH

hOW TO USE

Custom program

If you have a special combination of settings that you use

frequently, you can save these settings as a Custom Program.

* to save a custom program:

1. Turn on the dryer and turn the cycle selector knob to select the

desired cycle.

2. Use the cycle setting buttons to adjust the settings for that

cycle.

3. Press the cycle option button(s) for the option you would like to

add. A confirmation message will be shown in the display.

4. Press and hold the Custom Program button for 3 seconds.

to recall a custom program:

1. Turn on the dryer.

2. Press the Custom Program button to select the saved cycle.

3. Press the Start/Pause button to start the cycle.

Steam functions

to fill the steam feeder

1. Pull out the drawer.

2. Lift out the steam feeder.

3. Fill the steam feeder just to the filter screen.

4. Place the steam feeder in the drawer; then push in the drawer

until it clicks into place.

WARNINg

•

Do not fill the steam feeder with liquids such as gasoline,

dry-cleaning solvents, or other flammable or explosive

substances.

Failure to follow this warning can cause serious

injury or death.

•

Do not drink water from the steam feeder.

Failure to follow

this warning can cause serious injury or death.

Drawer

Water

ONLY

Steam

Feeder

NOTE

You may save only one custom program at a time. Pressing
and holding the Custom Program button will overwrite any
previously saved custom program.

NOTE

Before using a Steam Cycle, the steam feeder must be filled

with water up to the MAX line. If not, the will be

displayed. Make sure that the steam feeder is filled with water

or the drawer is fully closed. Turn the dryer off then restart the

Steam Cycle.

• Only use water. Do not fill the steam feeder with foreign

substances, rinse agents, or detergents.

• Before moving the dryer, make sure the steam feeder is

empty.

• Do not use distilled water; the water level sensor in the steam

generator will not work.

• Be careful to put the Steam Feeder otherwise water will be

overflow.

• Wipe up any spilled water around the Steam Feeder and the

drawer before starting the dryer.

• Do not fill the steam feeder with hot water (over 86°F/30°C).

Содержание DLEX8500V




















































Результаты поиска

Содержание DLEX8500V

Отзывы:

Похожие инструкции для DLEX8500V

Бренды по названию

Популярные бренды

LG DLEX8500V, Руководство пользователя

Результаты поиска

Содержание DLEX8500V

Отзывы:

Похожие инструкции для DLEX8500V

Бренды по названию

Популярные бренды