LG DLEX8500V Скачать руководство пользователя

Страница: 34 / 51

hOW TO USE

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed

information.

Check the lint filter before every

load

Always make sure the lint filter is clean before starting a new load;

a clogged lint filter will increase drying times.

To clean, pull the lint filter straight up and roll any lint off the filter

with your fingers. Do not rinse or wash the filter to remove lint.

Push the lint filter firmly back into place. See

Regular Cleaning

for more information.

Always ensure the lint filter is properly installed before running

the dryer. Running the dryer with a loose or missing lint filter will

damage the dryer and articles in the dryer.

Sorting load

fabric care labels

Most articles of clothing feature fabric care labels that include

instructions for proper care.

grouping similar Items

For best results, sort clothes into loads that can be dried with the

same drying cycle.

Different fabrics have different care requirements, and some

fabrics will dry more quickly than others.

Loading the Dryer

WARNINg

To reduce the risk of fire, electric shock, or injury to persons when

using this appliance, follow basic precautions, including the

following:

•

Check all pockets to make sure that they are empty. Items

such as clips, pens, coins, and keys can damage both your

dryer and your clothes. Flammable objects such as lighters

or matches could ignite, causing a fire.

Failure to do so can

result in fire, explosion, or death.

•

Never dry clothes that have been exposed to oil, gasoline,

or other flammable substances. Washing clothes will not

completely remove oil residues.

Failure to obey this warning

can result in fire, explosion, or death.

Tumble

dry

Dry

Normal

Permanent Press/

wrinkle resistant

Gentle/

delicate

Do not tumble dry

Do not dry

(used with

do not wash)

fabric care labels

Heat

setting

High

Medium

Low

No heat/air

Lint Filter

NOTE

• Combine large and small items in a load.
• Damp clothes will expand as they dry. Do not overload the

dryer; clothes require room to tumble dry properly.

• Close zippers, hooks, and drawstrings to prevent these items

from snagging or tangling on other clothes.

Содержание DLEX8500V




















































Результаты поиска

Содержание DLEX8500V

Отзывы:

Похожие инструкции для DLEX8500V

Бренды по названию

Популярные бренды

LG DLEX8500V, Руководство пользователя

Результаты поиска

Содержание DLEX8500V

Отзывы:

Похожие инструкции для DLEX8500V

Бренды по названию

Популярные бренды