manualshive.com logo in svg

LG DLE1501W, Руководство по обслуживанию

Поделиться
Скачать
LG DLE1501W Скачать руководство пользователя страница 35

35

FILTER ASSEMBLY

BLOWER HOUSING

BACK COVER

WARNING!

When you disassemble the Dryer, be sure to
disconnect the dryer from its electrical supply.
Protect your hands and arms from sharp edges
when working. To reduce the risk of personal
injury, adhere to all industry recommended
safety procedures including the use of long
sleeved gloves and safety glasses.

1.

Disassemble the top plate.

2.

Remove the cabinet cover and tub drum [Front ].

1.

Disassemble the top plate.

2.

Remove the cabinet cover and tub drum [Front ].

3.

Remove the drum assembly.

4.

Remove 7 screws.

5.

Pull the tub drum [Rear] towards the front.

1.

Remove the filter.

2.

Remove 3 screws.

4.

Disconnect the electrode sensor.

5.

Remove the bolt and washer.

3.

Remove the cover grid.

3.

Remove the drum assembly.

4.

Remove 2 screws and cover (Air guide).

6.

Remove the fan.

7.

Disconnect the motor clamp and motor.

Содержание DLE1501W












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды