Adjusting the general settings - more you can do
Adjusting the language settings
OSD –
Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu –
Selects a language for the Audio/
Menu/ Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then
ENTER
to
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
[Off] (for Disc Subtitle): Turns off Subtitle.
Adjusting the display settings
TV Aspect –
Select which screen aspect to use based on the shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode –
If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select –
Select an option according to the TV connection type.
[YPbPr]: When your TV is connected with the COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jacks on the unit.
[RGB]: When your TV is connected with the SCART jack.
- If you change TV Output Select to RGB from YPbPr on the setup menu
especially when connecting the unit in the way of component video connec-
tion, the screen turns black. In that case, connect the video cable to VIDEO
OUT jack and select YPbPr on the setup menu again.
Adjusting the general settings
ON REMOTE
1 Display setup menu
SETUP
2 Select a desired option on the first level
U
U u
u
3 Move to the second level
i
i
4 Select a desired option on the second level
U
U u
u
5 Move to the third level
i
i
6 Change the setting
U
U u
u
, ENTER
Initial Setting the Area Code
1 Display setup menu :
SETUP
2 Select LOCK menu on the first level:
U
U u
u
3 Move to second level :
The activated Area Code appears on the
second level. :
i
i
4 Move to the third level
i
i
5 Enter a new password
numerical buttons
(0-9) and ENTER
6 Recheck the entered new password
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area :
After select, Rating and Password will be
U
U u
u I
I i
i
and
activated.
ENTER
8 To confirm what you press :
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
ENTER
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
7
KD450 WRUSLL ENG-8639 1/24/11 7:08 PM Page 7
Downloaded From DvDPlayer-Manual.com LG Manuals
