Operating
39
Oper
ating
4
Listening to music on this unit
using Bluetooth device
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select a function other than the Bluetooth
function by using the
P
RADIO&INPUT
.
2. Place the Bluetooth device to be connected to
this unit within 1 meter of the unit.
3. Put the Bluetooth device in pairing mode.
Refer to your Bluetooth device’s user guide.
4. Press and hold
BLUETOOTH
.
Appears “INQUIRY”.
If searched Bluetooth is only one, pairing the
unit. Refer the step 7.
5. Appears depending on type of Bluetooth
devices in display window .
6. Select a Bluetooth device you want to connect
by using
W S
and press
b
ENTER
.
7. Enter the PIN code by using numberical
buttons.
PIN code : 0000
8. Press
b
ENTER
to confirm.
When this unit successfully paired with your
Bluetooth device, Bluetooth icon of this unit
lights up and appears “BT SRC”.
You can listen to music played on this unit using
your Bluetooth device.
Sound output from the speakers is stopped.
y
You cannot use VOL (volume), SOUND
EFFECT, SPEAKER LEVEL in this mode.
y
This function is recommended to use to
listening to music. While using Bluetooth
headset, sound and images may not
be matched depending on the wireless
environment or the connection conditions.
,
Note
Operating with Bluetooth device
You can operate a unit by connecting a Bluetooth
device using AVRCP. For details about operation,
refer to the Bluetooth device’s User Guide.
These operations may not be vailable for
certain Bluetooth device. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
,
Note
Connecting and disconnecting with a
Bluetooth device
This function is operated after pairing.
Press
BLUETOOTH
to connect or disconnect with a
Bluetooth device.
Appears belows in display window.
Connection : BT CONN
Disconnection : DISCONN
If you change the function of the unit, the
Bluetooth function is disconnected, press
BLUETOOTH pairing again.
(Bluetooth
Function other than the
Bluetooth)
,
Note
Checking the information of
connected Bluetooth device
This function is operated after pairing. You can
check the Bluetooth information.
Press and hold
m
INFO/DISPLAY
repeatedly.
Bluetooth information is changed as follows.
Local Bluetooth Device Address Device Name
None ...
DH7520T-AC.DIRNDLK_onego.indd 39
2012-01-26 �� 8:06:08
