91
Safety
be well below the maximum value. Because the phone is designed to
operate at multiple power levels to use only the power required to reach
the network, in general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the
government adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the body)
as required by the FCC for each model.
This device was tested for typical body-worn operations with the back of the
phone kept 0.39 inches (1.0 cm) between the user’s body and the back of
the phone. To comply with FCC RF exposure requirements, a minimum
separation distance of 0.39 inches (1.0 cm) must be maintained between
the user’s body and the back of the phone. Third-party belt-clips, holsters,
and similar accessories containing metallic components may not be used.
Body-worn accessories that cannot maintain 0.39 inches (1.0 cm) separation
distance between the user’s body and the back of the phone, and have not
been tested for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines.
The highest SAR value for this model phone when tested for use at the ear
is 0.77 W/kg and when worn on the body, as described in this user’s
manual, is 1.18 W/kg. While there may be differences between SAR levels
of various phones and at various positions, they all meet the government
requirement for safe exposure.
SAR information on this model phone is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/
after searching on FCC ID ZNFMS395.
To find information that pertains to a particular model phone, this site uses
the phone FCC ID number which is usually printed somewhere on the case
of the phone. Sometimes it may be necessary to remove the battery pack
