background image

ENGLISH

Maintenance and Service  

Maintenance and Service

TURN THE AIR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET.

The air filter should be checked at least twice a month to see if cleaning is necessary. Trapped particles
in the filter will build up and block the airflow. This reduces the cooling capacity and also causes an
accumulation of frost on the cooling coils.
1 Open the inlet grille upward by pulling out the bottom of the inlet grille.(a) 
2. Remove the air filter from the front grille assembly by pulling the air filter up or down slightly.
3. Wash the filter using lukewarm water below 40°C (104°F).(

b

)

4. Gently shake the excess water from the filter completely. Replace the filter.

Mark 

of inlet grille means opening direction.

NOTICE

Air Filter Cleaning

How to Attach Front Grille to Cabinet

1. Pull down front grille from the cabinet top.
2. Push front grille’s tips toward the cabinet in

order to insert front grille’s tabs into
the cabinet.

3. Open the inlet grille.
4. Tighten the screw through the front grille

into the plate of the evaporator or base
pan.

5. Close inlet grille.

ENGLISH

Owner’s Manual  2

1

Содержание D242AC1



























Отзывы: