background image

13

Adjust the water softener to the setting to the corresponding hardness of the water in your area.
The water softener has 8 adjustment levels.
The dishwasher is programmed at the factory for a water hardness level of “      ”.
This can be checked and altered by using the buttons on the control panel.

1. First, ensure the dishwasher is switched off.
2. Press 

UV(Cool Dry)

and 

Power

button simultaneously and keep them pressed.

3. To change the setting:

Simply press the 

UV(Cool Dry)

button, then the figure will change one by one.

The display will change between “      ” and “      ”.

4. Once the hardness setting is correctly adjusted, press the 

Spray

button.

The hardness setting is then saved.

Step 2. Setting up the softening system level of your dishwasher

Step 1. Check and find water hardness level

EFORE USING FOR THE FIRST TIME

B

Method 1  

1) Check the water hardness of your area.

(Your water utility company can help you with this.)

2) Set the softening system level of your dishwasher 

according to the water hardness level.
Refer to the Step 2.

Method 2  

1) Check your water hardness by using test strip.  (                                  ) 
2) Test  Procedure 

Immerse 

all reaction zones

of the test strip 

for approx.1sec (not in running water!)

.

Shake off excess liquid from the strip and 

wait for 1min

.

Then, the green color of the reaction zone will change to the red-violet.

Count the number of red-violet from the strip.   

3) Set the softening system level of your dishwasher according to the water hardness level.

Refer to the Step 2. 

You have to check your water hardness and set the softening system level before
operating your dishwasher.

Hardness range

< Water hardness level >

°

d

Number of

the areas

(red-violet)

°

e

°

f

mmol/l

(Ca+Mg)

mg/l 

Ca

Water 

quality

Softening

system

level

°

e = 14.25 mg/l CaCO

3

°

f = 10 mg/l CaCO

3

°

d = 10 mg/l CaO (=1,78 

°

f) (=1,25 

°

e)

<7

7 - 14

14 - 21

>21

<9

9 - 17,5

17,5 - 26

>26

<12,5

12,5 - 25

25 - 37

>37

<1,3

1,3 - 2,5
2,5 - 3,8

>3,8

<50

50 - 100

100 - 150

>150

soft

moderately hard

hard

very hard

H0, H1
H2, H3
H4, H5
H6, H7

Hardness setting

< Water hardness level >

(*L : Softening system level)

Содержание D1420AF





























Отзывы: